A crushed length of silver foil dryer duct behind a dryer pushed close to a laundry room wall, gray lint showing at the loose joint.

LG dryer
showing d80

d80 is LG's Flow Sense estimate that the exhaust duct is about 80 percent blocked; d75, d90 and d95 stand for roughly 75, 90 and 95 percent.

(844) 314-5837

Mon–Sat, 8am–8pm

  • Restricted airflow
  • Vent cleaning and inspection
  • Source: LG

Book a visit

Three short steps, about a minute.

or call (844) 314-5837

Before you book,
in this order.

Each step comes from LG's own guidance for d80 on its dryers. Follow it to the end: the last card says whether this is a visit.

01

Clean the lint filter, then pull the dryer out and look for a crushed, kinked or coiled transition duct behind it.

02

Run the dryer and confirm from outside that air is blowing out of the exhaust hood and its flaps open fully.

03

If the reading returns after that, book a vent cleaning; on a gas model, also confirm the gas valve is fully open.

Still there?

It usually turns into vent cleaning and inspection. Book with the code and the model number.

What not to do

d80 is not a failed part inside the dryer. It describes the duct run between the dryer and the outdoors.

What you may
notice with it.

The dryer problems d80 tends to arrive with. Answer these at the dryer before anyone is booked.

All problems

Where d80 usually leads

Vent cleaning and inspection.

Vent cleaning and inspection · lowest.

In LG's own words

If your dryer is displaying a d75, d80, d90 or d95 code, this indicates that the dryer's exhaust duct is clogged.
LG US Help Library: LG dryer error code list (Wayback copy, 28 Feb 2026) LG US Help Library: LG dryer error code list (Wayback copy, 28 Feb 2026)

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. LG dryers with Flow Sense; some models show bars on a Flow Sense indicator instead of a number.

LG d80 dryer repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A parent and a child folding warm towels together on top of a front-load dryer in a bright laundry room
For the heart of your home.

Questions
about d80.

Can I clear d80 myself?
Clean the lint filter, then pull the dryer out and look for a crushed, kinked or coiled transition duct behind it. If it comes back, it needs a visit.
Will the d80 on my LG dryer go away by itself?
The message may not appear on every load, but the restriction it measured stays until the duct is cleaned or straightened. Expect d80 to return if nothing changes behind or outside the dryer.
Why would a gas LG dryer show d80 when the vent is clean?
LG notes that on gas models d80 can also mean the burner is not receiving enough gas. With the duct confirmed clear, check that the gas shutoff is fully open and book a visit if the code persists.

Back to your everyday

Still showing d80?

Book with the code exactly as displayed, the whole model number, and whether you smell burning or gas — for a code, that is where the diagnosis starts.

(844) 314-5837 Schedule a repair