DryerRepair.center (844) 314-5837Mon–Sat, 8am–8pm Book a visit
A white front-loading electric dryer stands on a tiled floor in a US home laundry room.

Electrolux
Dryer Repair

Full-size front-load dryers in electric and gas versions, usually paired with a matching Electrolux washer.

(844) 314-5837

Mon–Sat, 8am–8pm

  • 3 dryer types
  • 6 problems we see
  • 4 error codes

Book a visit

Three short steps, about a minute.

or call (844) 314-5837

Electrolux dryers,
specifically.

Electrolux builds front-load electric and gas dryers, many with steam, sold as 300 to 600 series pairs with its washers. They have a clamshell lint filter, a moisture sensor at the front, and a steam valve on some models, and a few of the codes they display point to installation rather than failure.

The Electrolux lineup

Builds3 dryer types

Electric dryer · Gas dryer · Stackable dryer

Called out forDryer Takes Too Long to Dry

and 5 more problems on Electrolux

Repairs we do10 repairs, on any make

Diagnostic visit · Heating element repair · Gas burner and igniter repair · Drum belt and roller repair

Error codesE 42 · EF1 · E 4 · NO GAS

4 Electrolux codes with a page of their own

The Electrolux
lineup.

Electrolux builds 3 of the 4 dryer types this site covers. Which one decides how the visit is planned.

All dryer types
Electric

Electric dryer

2 of the problems we see on Electrolux come up on it Electric dryer repair Gas

Gas dryer

2 of the problems we see on Electrolux come up on it Gas dryer repair Stackable

Stackable dryer

4 of the problems we see on Electrolux come up on it Stackable dryer repair

What is particular
to Electrolux.

The range is organized into 300, 400, 500 and 600 series front-load dryers, with steam, sanitize and a drum light on the upper series; earlier Wave-Touch models used a touch display. The series tells a technician which options and sensors to expect.

A clamshell lint filter at the bottom

The LuxCare Lint Shield is a clamshell filter at the bottom of the door opening that opens with a button on top. Both faces have to be cleared, and lint left in the closed half is a common reason for slow drying.

An 18-month service interval

Electrolux asks for a qualified service professional to clean the cabinet interior, the lint screen housing and the exhaust duct every 18 months. A dryer past that point with long cycles is due for cleaning before parts.

Steam models need a water hookup

Steam dryers draw cold water through a hose kit that is sold separately, and they have a water valve inside. A steam model that runs normally but produces no steam starts with the supply and the hose, not the board.

Some codes are installation messages

Electrolux marks H4/B4 as incorrect wiring and a known installation issue, and Wave-Touch models run an install cycle that reports a miswired cord or no gas. Those point back to the hookup rather than to a failed dryer.

Parts

Common parts such as elements, igniters, belts and sensors are available by model number. Steam valves, display boards and older Wave-Touch parts can take longer to arrive.

Repair or replace

Most Electrolux dryer repairs, such as the lint path, a sensor, heat parts or the door latch, are worth doing on a front-load unit paired with a working washer. An older display-board failure is the case worth comparing against replacement.

Book your Electrolux visit

What we are
called out for.

On Electrolux, most often dryer takes too long to dry.

All problems

Electrolux error codes

All Electrolux codes
A lint screen held under a running laundry sink faucet in a US home laundry room, water beading on the mesh instead of passing through.

Dryer Takes Too Long to Dry

5 causes, cheapest first

 A hand holding damp towels just taken from an open front-load dryer in a US home laundry room, the drum interior visible.

Dryer Not Heating

6 causes, cheapest first

 A dryer display panel in a US home laundry room glowing with an unreadable blurred code, a hand holding a phone below it as if to photograph it.

Dryer Error Code

5 causes, cheapest first

 A close view of an open dryer door in a US home laundry room, showing the plastic door catch on the cabinet frame and the small switch opening beside it.

Dryer Door Won't Latch

5 causes, cheapest first

Not a
Electrolux?

Electrolux is one of 14 dryer makes on this site. The other 13 each have a page of their own.

All 14 brands

Electrolux dryer repair,
where we come out.

9 metros, each with its own page.

All service areas

Tampa BayFL · 31 areas

OrlandoFL · 30 areas

Miami / South FloridaFL · 47 areas

New York MetroNY · 75 areas

HoustonTX · 36 areas

ChicagoIL · 50 areas

Los AngelesCA · 95 areas

San DiegoCA · 31 areas

San Francisco Bay AreaCA · 74 areas

A parent and a child folding warm towels together on top of a front-load dryer in a bright laundry room
For the heart of your home.

Questions about
Electrolux dryers.

How do I clean the lint filter on an Electrolux dryer?
Pull the LuxCare Lint Shield straight up from the bottom of the door opening, press the button on top to open the clamshell, and clear both sides. Handle it by the frame rather than the mesh.
My Electrolux shows H4 or B4. Is the dryer broken?
Electrolux lists H4/B4 as incorrect wiring and calls it a known installation issue. It points to the power hookup, so the installer or an electrician is the first call; if the wiring checks out, book a visit.
Does an Electrolux steam dryer need a water line?
Yes. Steam models use a hose kit that is purchased separately and a cold water supply. No steam with the dryer otherwise working points first to that supply.

Back to your everyday

Book your Electrolux visit.

Have the dryer's model number ready — on Electrolux it decides which parts come on the first visit.

Schedule a repair Call (844) 314-5837
(844) 314-5837 Schedule a repair