A white front-loading electric dryer stands on a tiled floor in a US home laundry room.

Whirlpool
Dryer Repair

One of the most common dryer brands in American homes, in electric and gas versions and stacked laundry centers.

(844) 314-5837

Mon–Sat, 8am–8pm

  • 4 dryer types
  • 6 problems we see
  • 8 error codes

Book a visit

Three short steps, about a minute.

or call (844) 314-5837

Whirlpool dryers,
specifically.

Whirlpool sells vented electric and gas dryers in top-load and front-load pairs, and also ventless models and an all-in-one washer and dryer. Its display codes are published one by one, so on this brand the panel usually points at the vent, the house supply or a sensor before anyone opens the cabinet.

The Whirlpool lineup

What is particular
to Whirlpool.

The range covers vented top-load and front-load dryers in electric and gas, a commercial-grade residential model, compact heat-pump and HybridCare ventless dryers, and an all-in-one washer and dryer. Vented and ventless models fail in different places, so the type on the rating plate decides what the technician brings.

Sensor drying needs wet clothes on the strips

Automatic cycles rely on the load brushing the moisture strips inside the drum. Whirlpool raises F3E2 after five loads in a row give it no moisture reading, and names an unlevel cabinet and very small loads as the usual reasons, so a leveling check comes before any sensor part.

Two breakers, and only one runs the heat

An electric Whirlpool is fed on a 240-volt circuit with two breakers: one drives the motor and drum, the other the heating element. If only the heat side has tripped, the drum turns normally and the clothes stay damp, which looks like a broken element and is not.

The dryer reports a blocked vent itself

On models with the code, F4 E3 means restricted airflow from a clogged screen or a crushed, kinked or over-long vent run, and the dryer keeps running while it shows. Whirlpool asks for the whole vent run to be cleaned every one to two years and sells a vent testing kit for checking it.

Ventless models add a tank and a filter

The compact heat-pump dryer collects water in a tank that must be emptied and seated correctly, and the HybridCare dryer shows LF whenever its filter has been taken out. Both are owner-level checks worth doing before a visit is booked.

Parts

Heating elements, thermistors, belts, rollers and control boards for current vented Whirlpool dryers are common stock items. Ventless and all-in-one models use more specific parts, which can mean a second trip.

Repair or replace

Most Whirlpool dryer calls end with a sensor, element, thermal part, belt or vent cleaning, and those are worth doing on almost any working cabinet. A failed control board on an older basic model is where a new dryer deserves a comparison.

Book your Whirlpool visit

Not a
Whirlpool?

Whirlpool is one of 14 dryer makes on this site. The other 13 each have a page of their own.

All 14 brands
A parent and a child folding warm towels together on top of a front-load dryer in a bright laundry room
For the heart of your home.

Questions about
Whirlpool dryers.

My Whirlpool dryer tumbles but gives no heat. Is it the element?
Not necessarily. An electric model runs on two breakers, one for the motor and one for the heating element, so a single tripped breaker leaves the drum turning with no heat. Check both breakers in the panel first; if they are fine, book a visit.
Why does my Whirlpool stop early and leave small loads damp?
Sensor cycles judge dryness from clothes touching the moisture strips, and a few small items may barely touch them. Whirlpool suggests larger loads or a timed cycle for single items, and checking that the dryer stands level.
How often should the vent on a Whirlpool dryer be cleaned?
Whirlpool says the run from the dryer to the outside should be cleaned every one to two years, or sooner if drying slows down. A restricted-airflow code on the display is a sign it is already overdue.

Back to your everyday

Book your Whirlpool visit.

Have the dryer's model number ready — on Whirlpool it decides which parts come on the first visit.

(844) 314-5837 Schedule a repair